Guru
Joined: 13/10/2014
Location: AustraliaPosts: 2039
| Posted: 10:29am 14 Jan 2023 |
For anyone interested, these are photos of the Current through the Inductor and the voltage across the inductor, which shows the actual start point after the SCR fires.
It's very hard to see the graticule on the CRO as the Camera sees the CRO switching between the channels but it's not visible to the eye. I noticed the voltage goes negative from the collapsing magnetic field.
The Voltage is 100v, Current is 800A at the crossover point.
Zoomed in.
.