Hopefully? Another 48vdc-240vac Toriod Inverter build.

Author	Message
KeepIS Guru Joined: 13/10/2014 Location: Australia Posts: 1625	Posted: 10:47pm 12 Jun 2023         Revlac said   was the printing done with colour Laser or Inkjet? I mostly have trouble with Ink fading but its mostly out doors. Thanks Aaron, Just a colour Inkjet, the 20 year old units have not faded, but used mostly indoors. The good quality clear coats seem to be really tough, I follow up the initial 3 coats with another few coats once the Photo sheets are glued to the base front panel. Thing is they cost me virtually nothing to make, not much ink and the glue I use allow the sheets to be peeled off, So easy to print another and replace it.   tinyt said   I use this self-adhesive laminating sheet or this to protect printed labels, not sure if it will prevent fading. Thanks, that is slightly different to what I have tried before, I had problems with glare reflecting and some slight ripple with other laminating products on large thick photo paper panels. I may get some and test them out, they look like they may work, would save spraying wait time. The clarity and quality of the Front panel in the Pictures I posted does not do it justice, it's a really beautiful finish. Still couldn't get a pix of how crisp and sharp as really is. . Edited 2023-06-13 09:30 by KeepIS