Phonopaper (and questions - maybe to Volhout???)

Author	Message
Frank N. Furter Guru Joined: 28/05/2012 Location: Germany Posts: 1143	Posted: 09:42am 06 Jan 2023         Quote   The colored wires are the outputs. Under the brown phenolic you can see the 12 tone arms (different length, for different tones). And under the tone arms there is the single relay coil (yellow cylinder). The tone arms are very similar to the ones in mechanical music box (rotating drum with pins) Volhout Cool!!! Thank you very, very much!!!   Quote   For micromite FFT, this is one thread I found: https://www.thebackshed.com/forum/ViewTopic.php?TID=10987 There are later examples for the CMM2 but I haven't tried with the picomite yet. The code syntax will have changed a bit over the years. It would be easy enough to convert the magnitude output to colour depth waterfall. Jim Thanks! I will have a closer look at the link...   Quote   If you want to use fft for dound recording and reproduction, it needs to be fast as hell. I was afraid of that!!!   Frank