Guru
Joined: 11/02/2018
Location: AustraliaPosts: 3073
| Posted: 02:53am 16 Jan 2024 |
For those wanting to run Bubble Universe at 378MHz on a PicoMiteVGA load this .OPT file. Remove or change any Options that don't suit your setup with:
OPTION xxxxx DELETE
Then load your options.
PicoMiteVGA_5.08.00RC3_378MHz.zip
> option list
PicoMiteVGA MMBasic Version 5.08.00RC3
OPTION SYSTEM I2C GP6,GP7
OPTION COLOURCODE ON
OPTION KEYBOARD US
OPTION CPUSPEED (KHz) 378000
OPTION SDCARD GP13, GP10, GP11, GP12
OPTION RTC AUTO ENABLE
OPTION COUNT GP2,GP3,GP4,GP5
Refer to Peter's reasons for limiting the speed to 252MHz.
The use of certain new features may cause instability at 378MHz. Mainly, I think, things that make use of the second core.
The above programs are working fine for me.