PicoMite: can we explain/fix "ticking" when using PLAY SOUND


Author Message
phil99

Guru

Joined: 11/02/2018
Location: Australia
Posts: 2247
Posted: 07:33am 19 Mar 2023      

Play Sound entry in PicoMite 5.07.06 manual not quit right, VGA manual is correct.
'soundno' and 'channelno' duplicated and 'Type' missing.


PLAY SOUND soundno,
channelno, type [,frequency]
[,volume]

Play a series of sounds simultaneously on the audio output.
'soundno' is the sound number and can be from 1 to 4 allowing for four
simultaneous sounds on each channel. 'channelno' specifies the output
channel. It can be L (left speaker), R (right speaker) or B (both speakers)
'soundno' is the sound number and can be from 1 to 4 allowing for four
simultaneous sounds on each channel. 'channelno' specifies the output
channel. It can be L (left speaker), R (right speaker) or B (both speakers)
'frequency' is the frequency from 1 to 20000 (Hz) and it must be specified
except when type is O.
'volume' is optional and must be between 1 and 25. It defaults to 25