Guru
Joined: 08/06/2022
Location: AustriaPosts: 550
| Posted: 01:04pm 28 Mar 2023 |
Many thanks for the enhancement, the speed improvement with TFTP is really welcome. The only problem i have with big filetransfers is, that i run into a timeout using filemanager. The same file can be sent with TFTP without any issue.
-----------------------------------
On the MMCC console it says
>
2 directories, 2 files
Blocks: 42384
XMODEM RECEIVE "GB.bmp"
Transfer failed!
Finished
Timeout 28
-----------------------------------
in the Telnet window connected to the pico i get the transfer blocks and then:
....Error : Remote did not respond
-----------------------------------
seems to me as if MMCC is timeing out. Is there a place where the timeout value can be adjusted.
Regards,
Gerald