Guru
Joined: 22/02/2006
Location: AustraliaPosts: 1395
| Posted: 08:51am 17 Jun 2023 |
G'Day Guy's,
Well I have stepped back after that blown fet display on the MTTP project
Now with my other hobby of moonshining as I'm off the grid I just made my own burner and use LPG for heating. Now the crowd on the grid use elements where 2400 watt and 3600 watt ones are used.
So pure restive loads I read have caused problems so I do need to nut that one out as I do want this inverter I make to handle this load.
Did a parts count list for parts and $92 plus I still need to source the fet drivers. So plenty of time to think about these issues.
Cheers Bryan