Guru
Joined: 22/02/2006
Location: AustraliaPosts: 1395
| Posted: 07:02am 31 Jul 2023 |
G'Day Guy's,
Well got toriod and inductor mounted in that box I showed before and I secured the toriod with 1/4" allthread with some silicon hose over the thread to isolate and bolted down with some 16mm MDF.
I managed to put a 25 sqmm lug onto the primary outputs and I do think 1 off 16sqmm cable should be right for the connection to the board. If the cable does get warm I'll change it over to some 25sqmm wire.
Still got to put a cover over the hole in the back of the box so the inverter can be mounted and with using the Anderson connector it will be easy to connect to my shed battery and the old house battery as that is the connector I use on my system.
That small screen I have will see me thru the setting up and I do need to source the volt meter displays so finding the right ones may prove some fun or I may just lucky.
Cheers Bryan