Guru
Joined: 22/02/2006
Location: AustraliaPosts: 1391
| Posted: 06:27am 10 Oct 2023 |
G'Day Guy's,
Well at smoko this morning moved a bit of stuff so I could get some pic's
Now the core measure approx 250 high x 300 long and it's 100mm thick and it has the wires on each outer leg of the core. The core is all welded together and it won't take much to grind out the weld to get the windings out.
This is the donor Mig welder and plenty of good bits on it too like those 2 huge gauges a 50 volt one and a 300 amp one.
Mike yes that toriod I got from you did have the turns written on and to keep all that plastic tape from fraying I wrapped some of my yellow tape to fully cover the toriod. So any hope of taking windings out is gone as it's all sealed up and trying to take the tape will be a nightmare I'm sure.
Cheers Bryan