Guru
Joined: 22/02/2006
Location: AustraliaPosts: 1450
| Posted: 02:02am 23 Feb 2024 |
Well guy's my Kipoint inverter has finally died
Since the first week of this year it has been powering my shed fridge and working nicely and when I went into the shed when I got home as soon as I turned on the lights it went into fault mode and stays there. I do need to get some round tie points so I can wire in the shed wiring in that inverter I made and thats tomorrows job.
As I'm working fulltime nightshift I'm staying down in town and coming home Friday which is the start of my weekend
then I go back on Sunday night to startup the plant ready for Monday morning.As I did work last night today is my main free day so very soon it will be beer'O'clock
and it does make sure I get a goodnights sleep and most of the morning too.Anyway now it does look like I have a wound toriod to use for my Mad inverter board and got 99% of the parts now so thats one job to get onto.
I do want to use my lathe and mill this weekend so I'm sure that new inverter should handle it OK.
Cheers Bryan