Guru
Joined: 31/12/2016
Location: AustraliaPosts: 1032
| Posted: 08:27am 21 Jul 2024 |
Bryan,
The Mad inverter I have is still working well, and is the Oz inverter I tried first, However IF you cant get a reliable source for the 8010 chip too hard to solder, you could go with the Picoverter as it is compatible with the 10 pin connector and will just plug in, the nano can be programmed for low voltage cutoff etc, well worth looking into as its easy to build and low parts count.
Hope I have this all correct
https://www.thebackshed.com/forum/ViewTopic.php?TID=13650&P=7