Guru
Joined: 02/02/2017
Location: AustraliaPosts: 1424
| Posted: 01:26am 12 Aug 2024 |
the Victron 100/15 mppt in the camper is working well
(the way it works is not good, but it does regulate battery
voltage accurately)
I have 2 x 100 Ah 12 Lithium batteries in parallel.
The Absorb voltage is set manually by me, I did not choose any
type of battery from the supplied list on the device's config screen.
All the pre-configured battery options were useless for my battery.
I have seen it regulate the required 14.1V absorb voltage
and keep it there +/- 0.1V .
This voltage is shown on the bluetooth connected phone app as 14.1V
and it's confirmed to be 14.1V with the Fluke 27 DMM (meter)
After all this, I want to ask you if you can choose custom settings for
absorb and float voltages and if if so, have you done so?