Bryan's Inverter build

Author	Message
tinyt Guru Joined: 12/11/2017 Location: United States Posts: 556	Posted: 05:28am 07 Mar 2026         Bryan1 said   Ok the resistor bank voltage matched BV and settled 4 volts below the PSU voltage, now when the nano is turned the voltage quickly drops to 10 volts with a 200mA current draw. So turned it off So looks like when the TIP41/TIP42's are driven by the nano, is when voltage (24-10 = 14) drops in the resistor bank, the way I understand it. The TIP41/TIP42's drive the mosfet gates which are high impedance unless some are leaking/shorted. I don't want to say this and I could be wrong, but looks like the power board needs some serious troubleshooting.