MMEdit V5.2

Author Message

Joined: 05/03/2018
Location: Netherlands
Posts: 3701
Posted: 07:39am 25 Apr 2024      


This is great !!!


P.S. I see one issue with MMCC (tested on Linux). When I open it, it's default setting is MAXIMITE, /dev/ttyUSB0, 1200 baud.

I change this to PicoMiteVGA, /dev/ttyACM0, 115200baud.

In the menu I see no way to SAVE this setting. So I immagine, it does this in the background. I close MMCC. When I edit in MMEdit, and send to PicoMite, it opens MMCC with MAXIMITE, /dev/ttyACM0, 1200.

So it only remembers the port, not the baudrate, not the device.
And this is dangerous. Setting /dev/ttyACM0 to 1200 baud forces the PicoMiteVGA into bootloader mode. I was allert enough to pull the USB plug immediately, and still have a working PicoMite...
Edited 2024-04-25 17:46 by Volhout