Guru
Joined: 13/10/2014
Location: AustraliaPosts: 2228
| Posted: 03:52am 05 Jan 2024 |
There is a later version V2.1.9, it works a lot better and has all English text parameters.
You can see by the HD version they have a lot of different Chip Sets going back. The ones I posted are likely the main build now up to 16S, but smaller devices will obviously be different, as will the higher voltage BMS units.
From memory, the Phone APP lumps some of the settings into different tabs. And I don't think the Phone APP has the Level 2 parameter settings?
The latest PC V2.1.8 also has the Active EQ Tab, like the newer Phone APP, when either are connected to the BMS, that tab partly reflects the Passive 35ma balancer in the BMS.
However when they are connected to the Active EQ module, only the Data screen (no current reading) and the Active EQ screens are valid and will correctly set and read the Active EQ module status.
There are a lot of settings I have changed, starting with the absurdity of -45 deg operation temp.