Builiding of a complete 6kW PV inverter with MPPT chargers


Author Message
-dex-
Regular Member

Joined: 11/01/2024
Location: Poland
Posts: 77
Posted: 09:34am 19 Feb 2024      

Finally, I decided to stay with ~1T. I have prepared a winding wheel and a stand, now I'm going to finish the first layer. The core was insulated with a sheet of 0.19mm Mylar foil and the corners with tape.

Taking into account the advice of others regarding the hardness of the wire and sore fingers, I used 1.8 mm, but I see that I could work with a slightly thicker 2.0-2.2.