KeepIS
 Guru
 Joined: 13/10/2014 Location: AustraliaPosts: 1707 |
Posted: 10:55pm 26 Jul 2024 |
|
|
|
Great news on pack, fortunately mine came with fiberglass separator sheets, but what you have is great. The BMS should also help indicate if any terminal resistance loss creeps in under high loads over time.
I normally check the battery pack link bars with a resistive load of around 50A to verify each cell link, and recheck them a few times as the pack settles in.
I like the internal-R test Meter |