Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
KeepIS Guru Joined: 13/10/2014 Location: Australia Posts: 1685	Posted: 11:04am 11 Mar 2024       The problem, as I said previously, is when you try and mount that onto a big flat heatsink, the resistors and the beads must be below the top surface of the FET. IE It must be below the thickness then the FET body. Wiseguy and I mounted the FETs on thick intermediate narrow heat bars in the first builds. Not everyone may want to do that, this build is mounted straight onto a big heatsink. Those resistors would also bend and short out. . Edited 2024-03-11 21:06 by KeepIS