Guru
Joined: 13/10/2014
Location: AustraliaPosts: 1685
| Posted: 03:46am 13 Mar 2024 |
FYI If you are using the MP-K78U12 DC/DC Converter 48V to 12V 500mA module for the Nano controller, it's available from au.element14.com in a right angle pin mount:
DC-DC module
This is the right angle pin version, but leads should straighten with care? the straight Pin version seems to be on back order everywhere.
This can be omitted if you are using an external 12v supply source. I and others often use isolated DC-DC supplies. But these small units make for a neat installation.
You would need a separate 12v source for Fans though, this is a good idea in any case, I really don't like sharing the Nano and Power board 12V supply with any external devices.
This straight pin device is likely available elsewhere, but this is what I found, so sharing.
If anyone knows of, or can see a problem with using these, then please share.