Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
phil99 Guru Joined: 11/02/2018 Location: Australia Posts: 2247	Posted: 06:39am 29 Apr 2024       Quite some years ago I found a sketch on the Arduino site that programs a new bootloader on to a Nano using a Uno as the programmer. It worked well on a couple of cheap Nanos that arrived without the bootloader installed at all. You plug jumpers from the Uno to the 6 pins on the end of the Nano. Can't find it now unfortunately but worth searching for. Edit. This may help Edited 2024-04-29 17:14 by phil99