Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
Godoh Guru Joined: 26/09/2020 Location: Australia Posts: 505	Posted: 10:09pm 06 May 2024       Thanks for the replies , I am thinking of putting a kilovac on the outputs of the regulators. I have 8 regulators in all, so putting one on each controller would cost a lot. I have circuit breakers on the inputs of the regulators and on the outputs. So can easily isolate each regulator if required. If the kilovac tripped then I can test each regulator individually to see which one has a problem. Cheers Pete