Guru
Joined: 13/10/2014
Location: AustraliaPosts: 1768
| Posted: 11:37pm 08 Jun 2024 |
FYI: I removed both the Reset control cap and USB +5v supply diode between the onboard USB micro interface and the Nano Micro.
The USB controller and Nano are now only powered only from Controller +5v, this is the normal running state for the Nano module without a USB connection.
I placed a clip-on ferrite choke with 2 turns of the USB lead through it and bought it out to a USB socket on the Inverter cabinet.
I can now safely plug and unplug a USB connection to a Laptop or PC without any possible impact to the running Nano controller.
So, screw anything that thinks it has the right to control my Inverter Nano - except me.
What was that favorite slogan of mine - oh yes, "I will NOT comply"
.