Regular Member
Joined: 28/05/2024
Location: PortugalPosts: 79
| Posted: 12:43am 17 Jul 2024 |
I believe wiseguy made it clear that you cannot mix transformers sizes and they must be sized and wound exactly the same. The nano sees the inverter as one 12KW single unit. It is divided by 2 identical wound transformers running off 2 mainboards running off 1 single controler board. Wiseguy is working on another addon board that gives you the ability to turn off one of the transformers to save idle power and you have the ability to keep it in auto 6KW to 12KW switching mode or have the ability to switch on 12KW mode manually. There are also other safety features as peek current monitoring etc…
As for me since I only have a few devices that draw a lot of power for a short while like the water maker, dive compressor and of course the MIG welder which started this whole needing a 12KW inverter in the first place.
Wiseguy has steeped up the game in having this very unique feature where you can run an inverter at 6KW mode and save idle power or have it switch to 12KW mode automatically without blowing anything up or have the ability to manually switch to 12KW mode when you know you need the extra power. It’s an absolute brilliant design and very unique as I have never seen this feature in any inverter before.