Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
rogerdw Guru Joined: 22/10/2019 Location: Australia Posts: 887	Posted: 04:41am 20 Jul 2024         KeepIS said     Surprised that I got the three Toroids done a lot faster then I remembered taking the last time, then I recalled that I had carefully unwound the 230v AC windings back then, in this strip down, I cut the windings off as I had no use for them   Gulp What!!!  You just cut it off  ... that's terrible.   I know it's quicker but I couldn't do that, I'd feel too guilty.   Anyway, what were these toroids from in their previous life. And what diameter is that wire? And when you fit them together, do you put anything in between to protect the windings from each other  ...  especially where there are high spots pressing together.