Guru
Joined: 13/10/2014
Location: AustraliaPosts: 1860
| Posted: 02:22am 17 Aug 2024 |
The top row of meters are L to R
1: Power stage 1 DC Volts, Amps Power
2: Heat sink 1 temperature
3: Nano controller LCD
4: Heat sink 2 temperature
5: Power stage 2 DC Volts, Amps Power
Two analogue meters are 600A FSD Peak DC Input current:
LH - Power stage 1
RH - Power stage 2
Bottom row LED indicators (white) are Two on the Left - Power stage 1 and Two on the right Power stage 2, AC and DC current trip Indicators.
Middle Green LEDs:
1: Battery 53V DC connected
2: Low Voltage Input
3: RED LED: Nano Controller Status LED
4: Main Over current RESET button plus OC Indicator
5: Dual Power Mode enabled.
Center large Black knob - 3 position Inverter power:
(1) OFF - (2) AUTO start - (3) ON
