Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
analog8484 Senior Member Joined: 11/11/2021 Location: United States Posts: 138	Posted: 10:46pm 15 Mar 2025         KeepIS said   High current draw then Short on Inverter AC line. Looking back at the LOG, an Unknown fault on the AC wiring had caused the DC input to run over 17Kw, over 30kW peak, into the Inverter for at least 6 minutes. . Good thing nothing was damaged and you were able to verify the protection mechanisms worked as designed.  So, this mean the inverter can run 17kW for at least 6 minutes?