Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
oreo Senior Member Joined: 11/12/2020 Location: Canada Posts: 138	Posted: 10:37am 11 Apr 2025       What, no pictures? So this 14% loss is measured from the output of the MPPT compared to the 240v output? If so then that is really good, particularly when you consider that the 50w is about a 5% loss right there. Figure 1.5% for battery and 7.5% for inverter, not including standby power? Quick question.  I notice at low loads your inverter PWM is running at ~71%.  How high does it get with a 6kw or larger load? Edited 2025-04-11 20:47 by oreo