Guru
Joined: 13/10/2014
Location: AustraliaPosts: 1992
| Posted: 01:16am 11 Sep 2025 |
FYI a quick screen photo of the Ceramic Cook Top and other general loads.
Blue: Inverter Input current.
Green: Battery Charge current.
Cyan: Battery Voltage.
RED: Battery Discharge current.
Yellow: Solar Current.
Horz scale in minutes updated every second.
Vert scale in Amperes, and in Volts for Cyan trace (Battery Voltage)
Green: Battery Charge current.
Cyan: Battery Voltage.
RED: Battery Discharge current.
Yellow: Solar Current.
Horz scale in minutes updated every second.
Vert scale in Amperes, and in Volts for Cyan trace (Battery Voltage)
Because of the single Vertical scale, these reading are slightly low. IE: Battery volts is actually 54V.
Below: DC current from Cook-Top cycling from 4.2kW to almost 10kW.
Below: Cycling from 640W <-> 5.4kW and then 640W <-> 3kW.
Below: The Inverter output Wall power Box, the Tesla kWh meter will accurately calculate Power down to very low power levels (PF does not suddenly go to .58 because of the inability of these colour multi function meters to calculate low Power PF.
The "INV AC Direct" switch was for emergency running with just essential devices, I have a feeling this may not be needed, but I have it just in case. These meters were reset recently when the new power box was fitted.
_
Edited 2025-09-11 13:09 by KeepIS