Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
KeepIS Guru Joined: 13/10/2014 Location: Australia Posts: 1992	Posted: 10:18pm 17 Sep 2025       With the higher current sensor installed we peaked at a little over 13kW AC at 7am this morning, mainly resistive loads. Similar high load levels for short periods (10 minutes) in the evenings, then sits at around 4kW to 8kW for 30 to 50 minutes before dropping to under 1kW after cooking and showers are finished, under 400 watts after 9PM. _ Edited 2025-09-21 11:07 by KeepIS