Wiseguy New Inverter Build Nano R6
Author | Message | ||||
wiseguy![]() Guru ![]() Joined: 21/06/2018 Location: AustraliaPosts: 1206 |
Finally the BOM for the Inverter controller and Assembly overlay and Schematic is ready for posting. It should be referred to by its PCB No. which is WG39Rev6, Inverter Controller. The post topic is headed Nano Rev6, both refer to this BOM and PCB Rev6 number. I have spent many hours on this, but I cannot guarantee that it has no omissions or errors despite my best efforts. If any change is required it will probably be a resistor value tweak. As the LCD is such a small assembly and most will use it with the controller I have included it with this BOM at the bottom. I have a confession, the new (untested/unproven) Rev6 PCB is in Sydney on its way here and yet to be built up. I wont be accepting any orders or payments until it is proven as 100% ok. The Rev 5 was almost identical but this has a few extra feature and a better layout (and a few bug fixes). Below the controller now is the Power PCB BOM, ASSY and Schematic for WG30 Rev1 WG39 Rev6 Nano Controller BOM WG39 Rev6 Nano Controller BOM.pdf WG39 Rev6 Nano Controller Assembly Not to scale - larger for legibility WG39 Rev6 Nano Controller Assy.pdf WG39 REv6 Nano Controller Schematic WG39 Rev6 Nano Controller.pdf WG30 Rev1 Power PCB BOM WG30 Rev1 Power PCB BOM.pdf WG30 Rev1 Power PCB Assembly WG30 Rev1 Power PCB Assembly.pdf WG30 Rev1 Power PCB Schematic WG30 Rev1 Power PCB.pdf Edited 2024-03-11 20:11 by wiseguy |
||||