Wiseguy New Inverter Build Nano R6

Author	Message
KeepIS Guru Joined: 13/10/2014 Location: Australia Posts: 1860	Posted: 10:05pm 29 Jul 2024         Eddy C said   Ensuring leaving room for your FET board noticed images KeepIS had posted would exceed the 260mm x 108mm. Hi, those pictures show capacitor test boards that have not had the insulator section cut off, and as Mike pointed out, these special Cap boards are a few mm wider and do overhang slightly even with the fiberglass insulator pads cut off. On reflection, I should not have used 10,000uf caps, I think 4,700uf caps with 2 or 4 per board would be plenty of capacitance and cost a lot less. But that's just my opinion after a lot of testing in my inverters. Nice to see more of us building the inverter