Newbie
Joined: 26/03/2024
Location: United StatesPosts: 39
| Posted: 06:06pm 31 Mar 2024 |
Well thanks for the response" nickskethisniks", this is the kind of help I need. Did a little testing last night and I do have a nice window at 175-185 vdc. @ around 550 Hz. Since" mab1" indicated I could get by with less mosfets (I thought I would need more) I copied another EGS002 circuit using only 4 fets. I left off the fan circuit for now and use my own heatsinks and fan. Is pin 15 necessary to do some testing ? Don`t know how to hook that in. Does my AC power come from pins 5 and 9 on the EGS002 ? That many amps, I can`t have that right. Not sure how to ground everything and isolate the EGS002. I wouldn`t know what kind of current limiting resistor to use either. I`m sure some other caps need to be added. Much here I don`t know how to do. I made a schematic of what I do know and attached a copy of the circuit I copied from. Any help here would be much appreciated. Don`t assume I know anything.
