CMM2 G2 V2 design files


Author Message
PilotPirx

Regular Member

Joined: 03/11/2020
Location: Germany
Posts: 80
Posted: 07:41am 19 Apr 2024      

The pin assignment is not as printed on the board. If you look on the back, pin 40 is upper right (where the arrow is)and pin 1 is down left. I measured this with a voltmeter- its like first Gen CMM2. But the print on the board is vice versa.



And Pin40 in the schematic was previously Pin 1.
Here the new pinning


and here the old one:
same functions, but pin numbers switched


Edited 2024-04-19 18:02 by PilotPirx