joker Newbie
Joined: 06/02/2024 Location: GermanyPosts: 25 |
Posted: 07:09pm 06 May 2024 |
|
|
|
Hi, Yes, the LED is supplied with 3V3 but I need a TTL signal to feed the signal into my logic. I solved the issue now with a small level shifter:
There is a 10k pullup to 5V on the blue line, which is not shown here. This gives me nice 0/5V signal if the LED is ON/OFF.
Was not as complicated as I thought. :-)
Cheers Matthias |