Guru
Joined: 05/03/2018
Location: NetherlandsPosts: 4983
| Posted: 07:11am 19 Apr 2024 |
Grogster,
This is very strange. The only thing left I can think of is that the LCD connector is internally broken. When you push the LCD in (multimeter probe), it may make contact, but as soon as the pressure is off, the PCB side and the contact open up.
I have seen this once on a glass perl diode. You probe it and it looks okay, and when the probe is off, the diode is not a diode anymore. Only when I tried to de-solder it, it fell appart in pieces. From the outside this was not visible.
Volhout