SMALL UPS...

Author	Message
Grogster Admin Group Joined: 31/12/2012 Location: New Zealand Posts: 9974	Posted: 06:27am 30 May 2024         robert.rozee said   hi Grogster,    is it possible to get low-voltage wiring from a central location to each amplifier? if so, then you could distribute 48v AC to each unit, then at each unit use a voltage doubler to convert this to 90v DCv - if the units use a 110-230v switchmode power supply internally then they should be able to run on this 90v DC, but you would need to check just to be sure. cheers, rob   :-) Now THAT's an interesting idea, only cos in EVERY SINGLE ACCESS BOX, we have the old grease-filled copper telephone cables looping in and out, and MOST of that is now redundant, as people are being forced off of the copper network, and onto Fiber or Wireless for their phone and internet. So, the village basically has a MOSTLY redundant copper cable cable network in a kind of star configuration, for when everyone was still on copper.... Perhaps I could repurpose those cables! Hmmmmmmm.......food for thought!