Guru
Joined: 05/03/2018
Location: NetherlandsPosts: 5910
| Posted: 10:57am 30 May 2024 |
I just realize,
You have a village network consisting of coax cable and launch amplifiers per house/few houses. And it is a chain coax network. When one of the houses is sold (uninhabitted) or renovated (turn power off temporary) the chain is broken, and half the village is without TV/Radio.
But the launch amplifiers are powered from houses, correct ?
Isn't it simple to power the launch amplifier from 2 houses. The chance both houses are renovating at the same time is low, and both houses uninhabitted at the same time also.
A simple box, 2 mains cords, and the box has a DPDT mechanical relay to switch between the 2 power sources (switch both L and N).
Volhout
Edited 2024-05-30 20:58 by Volhout