DEX Problems

Author Message
Chopperp

Guru

Joined: 03/01/2018
Location: Australia
Posts: 1091
Posted: 02:39am 16 Jun 2024      

Hi DEX users

Since about early February, in Schematic, I have had trouble in one way or another with moving a selected object using the arrow keys in conjunction with the Shift/Ctrl keys.
The mouse works fine.

Could some please (Bigmik) with a late version, go to Schematic, draw a line, add an object or something & see if you can move it using the Arrow and either the shift or Ctrl keys & see if it works for me please. With the latest few versions, nothing happens for me & I have to reload a Feb version.

Thanks

Brian
ChopperP
bigmik

Guru

Joined: 20/06/2011
Location: Australia
Posts: 2946
Posted: 10:01am 17 Jun 2024      

Hi Brian,

I have just seen this post. I will try it for you tomorrow, I am stuck in the living room for the evening.

However, I never do movements by shift/Ctrl keys, I usually just click and drag to a new position.



Regards,

Mick
Chopperp

Guru

Joined: 03/01/2018
Location: Australia
Posts: 1091
Posted: 10:54am 17 Jun 2024      

Hi Mick

Ok, thanks. Waiting your findings.

I do both. I find  the keys are good for nudging things, particularly if they get miss aligned with the grid. Just annoying that everything was working OK earlier in the year & now it isn't.
CTRL + C / P (copy & paste) playing up as well

Mr. Dex, (Iliya) couldn't find a problem so no go there.

Thanks again.

Brian
bigmik

Guru

Joined: 20/06/2011
Location: Australia
Posts: 2946
Posted: 11:41pm 17 Jun 2024      

Hi Brian,

I contacted the developer and he says he has fixed the issue for you.

Download the latest and try it.

It is always best to use the MANTIS reporter to report issues as that gets his priority.

Regards,

Mick

PS.
I just tested it and it seems to work as you described but I didnt know that feature was there. I always just dragged with the mouse or select and adjust in the Properties panel.

Mik




.
Chopperp

Guru

Joined: 03/01/2018
Location: Australia
Posts: 1091
Posted: 11:38am 18 Jun 2024      

Hi Mick

Downloaded the latest version.

Sort of works. Still not quite right.
It does appear to be good if I don't have the popup Properties selected. (right click on object & select Properties). Locks up frequently with the properties selected.
I'll check it out for a few days & get back to you.

Thanks

Brian
bigmik

Guru

Joined: 20/06/2011
Location: Australia
Posts: 2946
Posted: 12:05pm 18 Jun 2024      

Hi Brian,

I HATE the pop up properties so I have them turned off, if I want properties I select an object and open the property panel.

It goes to show that there are many ways to do the same thing.

Send DEX a Mantis report after you have tested the changes

Regards,

Mick
bigmik

Guru

Joined: 20/06/2011
Location: Australia
Posts: 2946
Posted: 05:41am 21 Jun 2024      

Hi Brian, All,

I tested the SHIFT-ARROW with popup properties and it worked fine for me.

How did you go with it?

Mick



.
Chopperp

Guru

Joined: 03/01/2018
Location: Australia
Posts: 1091
Posted: 12:09am 23 Jun 2024      

Hi Mick

Thanks for testing. Much appreciated.

It is working much better but it does occasionally stop working. Along with the arrow /shift & ctrl keys not working, CTRL/ C, V, X, Y & Z freeze as well.  (Copy, paste etc via the mouse are OK but a bit slow), so I'm thinking that the program stops recognising the CTRL & SHIFT keys as they are a common link between the two.  

I also found that while locked up, if I toggle the Snap Points per Grid Icons e.g., go from 4 to 2 then back to 4, all comes good for awhile. Strange. Of course, killing the Pop up Properties panel & re-selecting the object, I can move it OK & Cut & Paste come good.

The normal Properties Panel, selected from the tool bars, as far as I can determine does not affect anything.......... OK, I just brought up the Main Properties Panel & the program is misbehaving quite regularly. Kill it & still plays up.

I may just run DEX without the Pop up Properties & select it when I need it. I don't mind this one popping up as I can move it out of the way. The other pop-ups centering around the mouse, I definitely hate.

BTW version Dex-2024.2.14 was the last one that didn't give me any problems that I was aware of. I've lost count of the number of times I have reinstalled it after trying out later versions (generally miss a few updates).


Thanks again.

Brian
disco4now

Guru

Joined: 18/12/2014
Location: Australia
Posts: 983
Posted: 02:54am 23 Jun 2024      

Hi Mick,
Is there still a DEX forum?
Gerry
bigmik

Guru

Joined: 20/06/2011
Location: Australia
Posts: 2946
Posted: 03:08am 23 Jun 2024      

Hi Gerry, All,

No, sadly, there is no users group forum hosted by DEX any more.

Regards,

mick