Guru
Joined: 26/09/2020
Location: AustraliaPosts: 642
| Posted: 09:05am 16 Aug 2024 |
The alternator you have built seems very complicated. It seems to me that using a normal three phase electric motor and turning it into an induction generator would been much easier.
I don't understand how your alternator is producing sine wave outputs. Usually the pole pieces have to be shaped with a curve on the edges to produce a sinewave.
It is hard to see but it looks like the white cups with the bolts are where each coil sits.
So maybe you could try connecting the coils so that they alternate, so One coil north on one side connected to the next south coil in the direction of rotation
Then continue on like that.
Unfortunately I am used to working with electric motors and alternators that are designed totally differently.
Sorry I don't have the answers you are looking for
Pete