Advise on adding together multiple power sources ......

Author	Message
ramblin Newbie Joined: 26/03/2024 Location: United States Posts: 39	Posted: 03:56pm 16 Aug 2024         Godoh said   I don't understand how your alternator is producing sine wave outputs. Usually the pole pieces have to be shaped with a curve on the edges to produce a sinewave. It is hard to see but it looks like the white cups with the bolts are where each coil sits. So maybe you could try connecting the coils so that they alternate, so One coil north on one side connected to the next south coil in the direction of rotation Pete Maybe a few pics will help. Here 2 coils are connected as you describe and the resulting output and scope shot. Load is 195 watts. Also a few types of coils I use. Doubt you can see the settings on the scope but were approx. 550Hz. Edited 2024-08-17 02:50 by ramblin