Regular Member
Joined: 04/02/2012
Location: AustraliaPosts: 84
| Posted: 04:58am 05 Oct 2024 |
A couple of things that you may find of value
You must alternate the magnets, as the magnetic material stays in its magnetised state and has to be reversed at each 1/2 cycle
see Mr Google re B/H curves for magnetic steels
You are getting 4 amps and 35 volts simultaneously? I suspect 35v is on open circuit and 4 amps on short circuit .Power is volts X amps
one other thing you seem to be getting confused re resistance.
When dealing with ac the reactance maybe 10 times more than the resistance
What matters is the impedance which is a combination of inductance and resistance .
Z impedance is (R^2+XL^2)^0.5
XL = 2 x pi x F x L