Guru
Joined: 05/10/2019
Location: United KingdomPosts: 8550
| Posted: 01:12pm 29 Aug 2024 |
Link to my efforts at soldering a DVD connector. :)
It isn't easy, but it's possible.
Here
=====================================
Have just installed the firmware and I now have a working DVI/HDMI 315MHz Pico 2 on an Alpha board. As this part of the board hasn't appreciably changed on the subsequent versions there's a very high probability that it will work on those too. I'm using 220R 0805 resistors instead of 270R 1206 but that's all I had. :)
SD card is the next stage then I'll probably start to look at USB.
=============================
SD card working. They work better when you remember to install the supply resistor...
.
Edited 2024-08-30 04:15 by Mixtel90