RP2350B 64 Pin development board

Author	Message
Mixtel90 Guru Joined: 05/10/2019 Location: United Kingdom Posts: 8964	Posted: 05:04pm 24 Aug 2024       JLCPCB will no doubt make anything within reason, but the chips definitely won't be available to them while there is a big demand for them for the Pico 2 at least. I still ask Why? though. There's no point. Apart from access to the QSPI bus the Pico 2 has just about everything that the bigger chip has, just less IO. It's fine as a design & development platform. If you absolutely *must* have all the IO then have an expansion board for a PGA2350 with the necessary bits mounted on it. Then there's that promised XL stamp module from Soldering Party. That could go onto a carrier board with 0.1" spacing. Probably...