Guru
Joined: 22/02/2006
Location: AustraliaPosts: 1769
| Posted: 07:28am 18 Sep 2024 |
G'Day Guy's,
Finally got my sectional Bender all finished and did a short youtube of the setup
Video link
https://youtu.be/5XK0roXpQow
Then as I had some 40x3mm flat bar just had to have a play and do the first roll
there is 75mm of kerf on each side which was expected using large rollers so one just 95% forms the piece then cut the kerf off to finish the last 5%.
Pretty happy this project has worked out nicely and just got a few finishing touch's to do to get it all finished.
Regards Bryan