Senior Member
Joined: 22/09/2014
Location: IrelandPosts: 254
| Posted: 02:41am 29 Aug 2024 |
Hello Everyone.
I had a forward/reverse switch operating my 24volt 10A Dc motor.
I had it wired with 4 relays .
Now I want to add a pmw speed controller
Which has 4 connections.
2 for power in and 2 to the motor
I am just not sure about the wiring seeing I am using the relays.
He reason for relays is that my box in which switches and pmw controller are fitted in is about one meter from motor and battery.
So power has to travel through 2X one meter.
Any help appreciated
Ron