Guru
Joined: 05/03/2018
Location: NetherlandsPosts: 5756
| Posted: 07:07am 04 Sep 2024 |
@Peter,
This is an observation that I want to share, but it may not be related to any bug.
When installing 5.09.00 and this new 6.00 beta I use OPTION RESET VGA DESIGN 2 to get all options set correctly for the platform.
And both platforms behave the same (they reboot, and after reboot the options are installed when you type OPTION LIST )
But when you install the options independent the behaviour with the OPTION MODBUFF is different.
On 5.09.00 OPTION MODBUFF ENABLE 180 asks confirmation, and then reboots (clear on Putty since it disconnects, difficult to see on TeraTerm since it reconnects).
On 6.00 OPTION MODBUFF ENABLE 180 asks confirmation, and then it "hangs". No reboot.
When I repower the pico (USB out/in), it shows the OPTION MODBUFF. But there is a difference between 50900 and 600 when this option is installed manually.
Volhout
Edited 2024-09-04 17:07 by Volhout