Guru
Joined: 11/02/2018
Location: AustraliaPosts: 3129
| Posted: 03:42am 05 Sep 2024 |
** See Edit below.
Still an issue with Xmodem. (using TeraTerm v5.2)
Standard Pico from 2024-09-04_000155_PicoMiteRP2040binaries.zip
> xmodem s '<--Sent the file ok, received without error but heartbeat stopped, no response to Ctrl-C.
'cycle power
option list
PicoMite MMBasic Version 6.00.00b4
OPTION SYSTEM SPI GP18,GP19,GP16
OPTION SYSTEM I2C GP8,GP9
OPTION COLOURCODE ON
OPTION CPUSPEED 400000 'KHz
OPTION DISPLAY 55, 148
OPTION LCDPANEL ILI9488, LANDSCAPE,GP15,GP14,GP13,GP7,INVERT
OPTION TOUCH GP12,GP11
GUI CALIBRATE 0, 3939, 3844, -1264, -873
OPTION SDCARD GP17
OPTION RTC AUTO ENABLE
>
'cycle power
option list
PicoMite MMBasic Version 6.00.00b4
OPTION SYSTEM SPI GP18,GP19,GP16
OPTION SYSTEM I2C GP8,GP9
OPTION COLOURCODE ON
OPTION CPUSPEED 400000 'KHz
OPTION DISPLAY 55, 148
OPTION LCDPANEL ILI9488, LANDSCAPE,GP15,GP14,GP13,GP7,INVERT
OPTION TOUCH GP12,GP11
GUI CALIBRATE 0, 3939, 3844, -1264, -873
OPTION SDCARD GP17
OPTION RTC AUTO ENABLE
>
Edit
Also tried OPTION CPUSPEED 64000 'KHz, same result.
Changed to TeraTerm v4.1 and Xmodem works without problem. TeraTerm settings appear to be the same.
Edited 2024-09-05 13:52 by phil99
Footnote added 2024-09-05 17:48 by phil99
Tried TeraTerm v5.2 again, Xmodem was consistently stopping the Pico now no problems.
No idea what is going on.