Guru
Joined: 05/03/2018
Location: NetherlandsPosts: 4437
| Posted: 04:31pm 04 Nov 2024 |
They also use pins from the bottom of the pico zero.
You could just as well take a normal pico.
If you have the 220 ohm resistors close to the PIO pins, vga and hdmi will not be affected much.
But you can never plug both.
The I2C bus (gp14-15) does not have pull-ups. I wonder if the build in pull-ups will work with a nunchuck.
Volhout
Edited 2024-11-05 02:34 by Volhout