Poida MPPT setting changes for LiFePo?

Author	Message
Murphy's friend Guru Joined: 04/10/2019 Location: Australia Posts: 673	Posted: 08:28am 17 Dec 2024         flyingfishfinger said   Is anyone using this MPPT for LiFePo batteries? If yes, what settings are you using? Cheers, R I have been using Poida's MPPT ever since he published it first about 3 1/2 years ago. This is with my 25KWh Lithium battery bank. There were no problems with the MPPT once I had it set up to run reliably. My settings are, as per the menu posted back then: G - zero Iin sensor 123 ADC counts H - zero Iout sensor 119 ADC counts I - max battery Volts 57.5V J - Absorb voltage 56.0V L - maximum Current 50A M - night power 5W O - NO Equalisation S - Float voltage 55.5V The remaining menu letter settings are left as Poida posted them in his message, dated 08 Sep 2020 I have never observed battery bank voltages higher than 56V, the MPPT changes to float once that is reached.