Guru
Joined: 02/06/2014
Location: GermanyPosts: 1501
| Posted: 12:08pm 03 Feb 2025 |
> option list
PicoMiteHDMI MMBasic USB RP2350A Edition V6.00.01
OPTION SERIAL CONSOLE COM2,GP8,GP9
OPTION SYSTEM I2C GP20,GP21
OPTION FLASH SIZE 4194304
OPTION COLOURCODE ON
OPTION KEYBOARD GR
OPTION CPUSPEED (KHz) 315000
OPTION SDCARD GP22, GP26, GP27, GP28
OPTION AUDIO GP10,GP11', ON PWM CHANNEL 5
OPTION RTC AUTO ENABLE
OPTION MODBUFF ENABLE 192
OPTION F9 FLASH RUN 2
OPTION PLATFORM HDMIUSB
PicoMiteHDMI MMBasic USB RP2350A Edition V6.00.01
OPTION SERIAL CONSOLE COM2,GP8,GP9
OPTION SYSTEM I2C GP20,GP21
OPTION FLASH SIZE 4194304
OPTION COLOURCODE ON
OPTION KEYBOARD GR
OPTION CPUSPEED (KHz) 315000
OPTION SDCARD GP22, GP26, GP27, GP28
OPTION AUDIO GP10,GP11', ON PWM CHANNEL 5
OPTION RTC AUTO ENABLE
OPTION MODBUFF ENABLE 192
OPTION F9 FLASH RUN 2
OPTION PLATFORM HDMIUSB
Bug report for Loc() on drive b: (SD-Card) (RP2350A Edition V6.00.01)
Sub testloc
Open "tt.nsa" For input As #1
Print Loc(#1)
Line Input #1,A$
Print A$,Len(A$)
Print Loc(#1)
close #1
End Sub
Open "tt.nsa" For input As #1
Print Loc(#1)
Line Input #1,A$
Print A$,Len(A$)
Print Loc(#1)
close #1
End Sub
> a:
> run
1
DIR: nsa 8
11
> b:
> run
1
DIR: nsa 8
219
> run
1
DIR: nsa 8
11
> b:
> run
1
DIR: nsa 8
219
The same code produces different results for different drives.
If this has already been fixed, please just forget about it.
tt.zip
BTW: Line Input (and Loc()) works not with "open "xxx" for random"?
Regards
Michael